dmesg - Intel Core 2 Duo T6500
microcode: microcode updated early to revision 0xa0b, date = 2010-09-28
Linux version 5.3.0-26-generic (buildd@lgw01-amd64-039) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) #28~18.04.1-Ubuntu SMP Wed Dec 18 16:40:14 UTC 2019 (Ubuntu 5.3.0-26.28~18.04.1-generic 5.3.13)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Hygon HygonGenuine
Centaur CentaurHauls
zhaoxin Shanghai
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000d8000-0x00000000000dffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bdaa0fff] usable
BIOS-e820: [mem 0x00000000bdaa1000-0x00000000bdaa6fff] reserved
BIOS-e820: [mem 0x00000000bdaa7000-0x00000000bdbbbfff] usable
BIOS-e820: [mem 0x00000000bdbbc000-0x00000000bdc0efff] reserved
BIOS-e820: [mem 0x00000000bdc0f000-0x00000000bdd07fff] usable
BIOS-e820: [mem 0x00000000bdd08000-0x00000000bdf0efff] reserved
BIOS-e820: [mem 0x00000000bdf0f000-0x00000000bdf18fff] usable
BIOS-e820: [mem 0x00000000bdf19000-0x00000000bdf1efff] reserved
BIOS-e820: [mem 0x00000000bdf1f000-0x00000000bdf63fff] usable
BIOS-e820: [mem 0x00000000bdf64000-0x00000000bdf9efff] ACPI NVS
BIOS-e820: [mem 0x00000000bdf9f000-0x00000000bdfe0fff] usable
BIOS-e820: [mem 0x00000000bdfe1000-0x00000000bdffefff] ACPI data
BIOS-e820: [mem 0x00000000bdfff000-0x00000000bdffffff] usable
BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: TOSHIBA Satellite A500/KSKAA, BIOS V1.20 06/16/2009
tsc: Fast TSC calibration using PIT
tsc: Detected 2094.731 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x140000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 100000000 mask FC0000000 write-back
3 base 0FFE00000 mask FFFF80000 write-protect
4 disabled
5 disabled
6 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xbe000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f67b0-0x000f67bf]
check: Scanning 1 areas for low memory corruption
BRK [0x109001000, 0x109001fff] PGTABLE
BRK [0x109002000, 0x109002fff] PGTABLE
BRK [0x109003000, 0x109003fff] PGTABLE
BRK [0x109004000, 0x109004fff] PGTABLE
BRK [0x109005000, 0x109005fff] PGTABLE
BRK [0x109006000, 0x109006fff] PGTABLE
BRK [0x109007000, 0x109007fff] PGTABLE
BRK [0x109008000, 0x109008fff] PGTABLE
BRK [0x109009000, 0x109009fff] PGTABLE
BRK [0x10900a000, 0x10900afff] PGTABLE
RAMDISK: [mem 0x2fb87000-0x33dbafff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F66F0 000024 (v02 TOSCPL)
ACPI: XSDT 0x00000000BDFF2CA9 000064 (v01 TOSCPL TOSCPL00 06040000 LTP 00000000)
ACPI: FACP 0x00000000BDFE3000 0000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 0x00000000BDFE4000 00BE67 (v02 Intel CANTIGA 06040000 INTL 20060608)
ACPI: FACS 0x00000000BDF9EFC0 000040
ACPI: FACS 0x00000000BDF9EFC0 000040
ACPI: HPET 0x00000000BDFFED14 000038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 0x00000000BDFFED4C 00003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: SLIC 0x00000000BDFFED88 000176 (v01 TOSCPL TOSCPL00 06040000 LOHR 00000000)
ACPI: OSFR 0x00000000BDFFEEFE 000072 (v01 TOSHIB A+2nd ID 06040000 TASM 04010000)
ACPI: APIC 0x00000000BDFFEF70 000068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 0x00000000BDFFEFD8 000028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 0x00000000BDFE2000 000655 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
NODE_DATA(0) allocated [mem 0x13ffd5000-0x13fffffff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000013fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009efff]
node 0: [mem 0x0000000000100000-0x00000000bdaa0fff]
node 0: [mem 0x00000000bdaa7000-0x00000000bdbbbfff]
node 0: [mem 0x00000000bdc0f000-0x00000000bdd07fff]
node 0: [mem 0x00000000bdf0f000-0x00000000bdf18fff]
node 0: [mem 0x00000000bdf1f000-0x00000000bdf63fff]
node 0: [mem 0x00000000bdf9f000-0x00000000bdfe0fff]
node 0: [mem 0x00000000bdfff000-0x00000000bdffffff]
node 0: [mem 0x0000000100000000-0x000000013fffffff]
Zeroed struct page in unavailable ranges: 8993 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
On node 0 totalpages: 1039583
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 12086 pages used for memmap
DMA32 zone: 773441 pages, LIFO batch:63
Normal zone: 4096 pages used for memmap
Normal zone: 262144 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000d7fff]
PM: Registered nosave memory: [mem 0x000d8000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xbdaa1000-0xbdaa6fff]
PM: Registered nosave memory: [mem 0xbdbbc000-0xbdc0efff]
PM: Registered nosave memory: [mem 0xbdd08000-0xbdf0efff]
PM: Registered nosave memory: [mem 0xbdf19000-0xbdf1efff]
PM: Registered nosave memory: [mem 0xbdf64000-0xbdf9efff]
PM: Registered nosave memory: [mem 0xbdfe1000-0xbdffefff]
PM: Registered nosave memory: [mem 0xbe000000-0xffffffff]
[mem 0xbe000000-0xffffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u1048576
pcpu-alloc: s184320 r8192 d28672 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists, mobility grouping on. Total pages: 1023316
Policy zone: Normal
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
mem auto-init: stack:off, heap alloc:on, heap free:off
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3919184K/4158332K available (14339K kernel code, 2370K rwdata, 4668K rodata, 2660K init, 5076K bss, 239148K reserved, 0K cma-reserved)
random: get_random_u64 called from __kmem_cache_create+0x41/0x540 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 42927 entries in 168 pages
rcu: Hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2.
Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
printk: console [tty0] enabled
ACPI: Core revision 20190703
TOSHIBA Satellite detected - force copy of DSDT to local memory
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x1e31bf07a96, max_idle_ns: 440795208811 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4189.46 BogoMIPS (lpj=8378924)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
*** VALIDATE proc ***
*** VALIDATE cgroup1 ***
*** VALIDATE cgroup2 ***
mce: CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU T6500 @ 2.10GHz (family: 0x6, model: 0x17, stepping: 0xa)
Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 2 processors activated (8378.92 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
PM: Registering ACPI NVS region [mem 0xbdf64000-0xbdf9efff] (241664 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 04:19:32, date: 2021-04-07
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1617769171.140:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0x36 set to 0x1
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: Forced DSDT copy: length 0x0BE67 copied locally, original unmapped
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BA6BB3A9C00 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BA6BB352800 0005A3 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BA6BB3A6C00 0001CF (v01 PmRef ApIst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF9BA6BB37BA80 00008D (v01 PmRef ApCst 00003000 INTL 20050624)
ACPI: EC: EC started
ACPI: EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 17 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f]
pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0xf4504800-0xf4504bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf4500000-0xf4503fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f]
pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf]
pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf4504c00-0xf4504fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x18f0-0x18f7]
pci 0000:00:1f.2: reg 0x14: [io 0x18e4-0x18e7]
pci 0000:00:1f.2: reg 0x18: [io 0x18e8-0x18ef]
pci 0000:00:1f.2: reg 0x1c: [io 0x18e0-0x18e3]
pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18df]
pci 0000:00:1f.2: reg 0x24: [mem 0xf4504000-0xf45047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: [1002:9480] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:00.0: reg 0x14: [io 0x2000-0x20ff]
pci 0000:01:00.0: reg 0x18: [mem 0xf4000000-0xf400ffff]
pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:01:00.0: enabling Extended Tags
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xf4010000-0xf4013fff]
pci 0000:01:00.1: enabling Extended Tags
pci 0000:01:00.1: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
acpiphp: Slot [1] registered
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf3ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:14:00.0: [168c:002b] type 00 class 0x028000
pci 0000:14:00.0: reg 0x10: [mem 0xf4100000-0xf410ffff 64bit]
pci 0000:14:00.0: supports D1
pci 0000:14:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:1c.3: PCI bridge to [bus 14]
pci 0000:00:1c.3: bridge window [mem 0xf4100000-0xf41fffff]
pci 0000:20:00.0: [197b:2382] type 00 class 0x088000
pci 0000:20:00.0: reg 0x10: [mem 0xf4201400-0xf42014ff]
pci 0000:20:00.2: [197b:2381] type 00 class 0x080501
pci 0000:20:00.2: reg 0x10: [mem 0xf4201800-0xf42018ff]
pci 0000:20:00.3: [197b:2383] type 00 class 0x088000
pci 0000:20:00.3: reg 0x10: [mem 0xf4201c00-0xf4201cff]
pci 0000:20:00.4: [197b:2384] type 00 class 0x088000
pci 0000:20:00.4: reg 0x10: [mem 0xf4202000-0xf42020ff]
pci 0000:00:1c.5: PCI bridge to [bus 20]
pci 0000:00:1c.5: bridge window [mem 0xf4200000-0xf42fffff]
pci_bus 0000:26: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: EC: interrupt unblocked
ACPI: EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:01:00.0: vgaarb: setting as boot VGA device
pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:01:00.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbdaa1000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdbbc000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdd08000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdf19000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdf64000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbdfe1000-0xbfffffff]
e820: reserve RAM buffer [mem 0xbe000000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet: 4 channels of 0 reserved for per-cpu timers
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
*** VALIDATE hugetlbfs ***
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs ENE0200 (active)
system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
system 00:02: [io 0x0480-0x048f] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0xffff] has been reserved
system 00:02: [io 0x0400-0x047f] has been reserved
system 00:02: [io 0x1180-0x11ff] has been reserved
system 00:02: [io 0xfe00] has been reserved
system 00:02: [io 0xff2c-0xff7f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:05: Plug and Play ACPI device, IDs SYN0712 SYN0700 SYN0002 PNP0f13 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.3: bridge window [io 0x1000-0x0fff] to [bus 14] add_size 1000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 14] add_size 200000 add_align 100000
pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000
pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 20] add_size 200000 add_align 100000
pci 0000:00:1c.3: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.3: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x5000-0x5fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0400000-0xc04000ff 64bit]
pci 0000:01:00.0: BAR 6: assigned [mem 0xf4020000-0xf403ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-03]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf2000000-0xf3ffffff]
pci 0000:00:1c.0: bridge window [mem 0xf0000000-0xf1ffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 14]
pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.3: bridge window [mem 0xf4100000-0xf41fffff]
pci 0000:00:1c.3: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 20]
pci 0000:00:1c.5: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.5: bridge window [mem 0xf4200000-0xf42fffff]
pci 0000:00:1c.5: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 26]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:00: resource 10 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:00: resource 11 [mem 0xf0000000-0xfebfffff window]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf40fffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf3ffffff]
pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf1ffffff 64bit pref]
pci_bus 0000:14: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:14: resource 1 [mem 0xf4100000-0xf41fffff]
pci_bus 0000:14: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:20: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:20: resource 1 [mem 0xf4200000-0xf42fffff]
pci_bus 0000:20: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:26: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:26: resource 7 [mem 0x000d0000-0x000d3fff window]
pci_bus 0000:26: resource 8 [mem 0x000d4000-0x000d7fff window]
pci_bus 0000:26: resource 9 [mem 0x000e0000-0x000e3fff window]
pci_bus 0000:26: resource 10 [mem 0xc0000000-0xdfffffff window]
pci_bus 0000:26: resource 11 [mem 0xf0000000-0xfebfffff window]
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 67792K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xb9aa1000-0xbdaa1000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0x(____ptrval____), using 3072k, total 3072k
fbcon: Deferring console take-over
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
ACPI: AC Adapter [ACAD] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
tsc: Marking TSC unstable due to TSC halts in idle
clocksource: Switched to clocksource hpet
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
ehci-pci 0000:00:1a.7: irq 19, io mem 0xf4504800
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.3.0-26-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.7: debug port 1
battery: ACPI: Battery Slot [BAT1] (battery absent)
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xf4504c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.03
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.3.0-26-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.7
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: detected 2 ports
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 5.3.0-26-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1a.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: detected 2 ports
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 5.3.0-26-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1a.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: detected 2 ports
uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 5.3.0-26-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1a.2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: UHCI Host Controller
usb usb6: Manufacturer: Linux 5.3.0-26-generic uhci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: UHCI Host Controller
usb usb7: Manufacturer: Linux 5.3.0-26-generic uhci_hcd
usb usb7: SerialNumber: 0000:00:1d.1
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.03
usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb8: Product: UHCI Host Controller
usb usb8: Manufacturer: Linux 5.3.0-26-generic uhci_hcd
usb usb8: SerialNumber: 0000:00:1d.2
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: CPU model not supported
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
RAS: Correctable Errors collector initialized.
microcode: sig=0x1067a, pf=0x80, revision=0xa0b
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 8098f9b3401d48cb244b138af0c5bac131caef8a'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM: Magic number: 1:206:312
rtc_cmos 00:03: setting system clock to 2021-04-07T04:19:33 UTC (1617769173)
Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
Freeing unused decrypted memory: 2040K
Freeing unused kernel image memory: 2660K
Write protecting the kernel read-only data: 22528k
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1476K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input5
usb 1-6: new high-speed USB device number 2 using ehci-pci
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pci 0000:20:00.0: SDHCI controller found [197b:2382] (rev 0)
mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pmp pio slum part ccc sxs
scsi host0: ahci
mmc0: SDHCI controller on PCI [0000:20:00.0] using DMA
sdhci-pci 0000:20:00.2: SDHCI controller found [197b:2381] (rev 0)
sdhci-pci 0000:20:00.2: Refusing to bind to secondary interface.
scsi host1: ahci
scsi host2: ahci
[drm] radeon kernel modesetting enabled.
radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xd0000000 -> 0xdfffffff
radeon 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xf4000000 -> 0xf400ffff
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb0: switching to radeondrmfb from VESA VGA
radeon 0000:01:00.0: vgaarb: deactivate vga console
[drm] initializing kernel modesetting (RV730 0x1002:0x9480 0x1179:0xFF00 0x00).
resource sanity check: requesting [mem 0x000c0000-0x000dffff], which spans more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
caller pci_map_rom+0x71/0x1d0 mapping multiple BARs
ATOM BIOS: BR32659.001
radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[drm] Detected VRAM RAM=1024M, BAR=256M
[drm] RAM width 128bits DDR
scsi host3: ahci
[TTM] Zone kernel: Available graphics memory: 1997600 KiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 1024M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading RV730 Microcode
[drm] radeon: dpm initialized
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000000014C000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0x(____ptrval____)
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0x(____ptrval____)
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0x(____ptrval____)
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: radeon: MSI limited to 32-bit
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504100 irq 28
ata2: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504180 irq 28
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504300 irq 28
ata6: SATA max UDMA/133 abar m2048@0xf4504000 port 0xf4504380 irq 28
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 3 usecs
usb 6-1: new low-speed USB device number 2 using uhci_hcd
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
random: fast init done
usb 1-6: New USB device found, idVendor=064e, idProduct=c117, bcdDevice= 1.30
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB 2.0 HD Camera
usb 1-6: Manufacturer: SuYin
usb 1-6: SerialNumber: CN1014-P80A-OV031-VS-R01.03.00
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
usb 6-1: New USB device found, idVendor=10c4, idProduct=8105, bcdDevice= 0.00
usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 6-1: Product: USB OPTICAL MOUSE
usb 6-1: Manufacturer: YSPRINGTECH
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:10C4:8105.0001/input/input7
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-0000:00:1d.0-1/input0
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-9: WDC WD5000LPVX-00V0TT0, 01.01A01, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA WDC WD5000LPVX-0 1A01 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
sd 1:0:0:0: [sda] 4096-byte physical blocks
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata5.00: ATAPI: HL-DT-ST DVDRAM GT20N, CT03, max UDMA/133
ata5.00: configured for UDMA/133
scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GT20N CT03 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3 sda4
sd 1:0:0:0: [sda] Attached SCSI disk
sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
[drm] ib test on ring 5 succeeded
[drm] radeon atom DIG backlight initialized
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] LVDS-1
[drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74 0x7f74
[drm] Encoders:
[drm] LCD1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] VGA-1
[drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac 0x7fac
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 2:
[drm] HDMI-A-1
[drm] HPD2
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 3:
[drm] DP-1
[drm] HPD3
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
usb 7-1: new low-speed USB device number 2 using uhci_hcd
usb 7-1: New USB device found, idVendor=1a2c, idProduct=2d23, bcdDevice= 1.10
usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 7-1: Product: USB Keyboard
usb 7-1: Manufacturer: USB
input: USB USB Keyboard as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:1A2C:2D23.0002/input/input8
hid-generic 0003:1A2C:2D23.0002: input,hidraw1: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:00:1d.1-1/input0
input: USB USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/0003:1A2C:2D23.0003/input/input9
input: USB USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.1/0003:1A2C:2D23.0003/input/input10
hid-generic 0003:1A2C:2D23.0003: input,hidraw2: USB HID v1.10 Device [USB USB Keyboard] on usb-0000:00:1d.1-1/input1
fbcon: Taking over console
psmouse serio1: synaptics: queried max coordinates: x [..5772], y [..5086]
[drm] fb mappable at 0xD034D000
[drm] vram apper at 0xD0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 570026
psmouse serio1: synaptics: Toshiba Satellite A500 detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
raid6: sse2x4 gen() 6145 MB/s
raid6: sse2x4 xor() 4759 MB/s
raid6: sse2x2 gen() 3741 MB/s
raid6: sse2x2 xor() 4270 MB/s
raid6: sse2x1 gen() 3154 MB/s
raid6: sse2x1 xor() 3489 MB/s
raid6: using algorithm sse2x4 gen() 6145 MB/s
raid6: .... xor() 4759 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 11642.000 MB/sec
generic_sse: 9870.000 MB/sec
xor: using function: prefetch64-sse (11642.000 MB/sec)
Btrfs loaded, crc32c=crc32c-generic
random: crng init done
random: 7 urandom warning(s) missed due to ratelimiting
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Received SIGRTMIN+20 from PID 318 (plymouthd).
systemd[1]: Received SIGRTMIN+20 from PID 318 (plymouthd).
systemd[1]: Received SIGRTMIN+20 from PID 318 (plymouthd).
systemd[1]: Created slice User and Session Slice.
systemd[1]: Created slice System Slice.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Read required files in advance.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Started udev Coldplug all Devices.
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
systemd[1]: Started Remount Root and Kernel File Systems.
systemd[1]: Starting Load/Save Random Seed...
systemd[1]: Activating swap /swapfile...
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Started Load/Save Random Seed.
lp: driver loaded but no devices found
Adding 700960k swap on /swapfile. Priority:-2 extents:3 across:717344k FS
systemd[1]: Activated swap /swapfile.
ppdev: user-space parallel port driver
systemd-journald[419]: Received request to flush runtime journal from PID 1
toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xd2
ene_ir: PLL freq = 1406
ene_ir: KB3926D or higher detected
ene_ir: Firmware regs: cc 00
ene_ir: Hardware features:
ene_ir: * Uses GPIO 40 for IR demodulated input
ene_ir: * Uses new style input buffer
ene_ir: Hardware uses 2 extended buffers:
ene_ir: 0xfa48 - len : 15
ene_ir: 0xfb24 - len : 17
ene_ir: Total buffer len = 40
toshiba_haps: Toshiba HDD Active Protection Sensor device
Registered IR keymap rc-rc6-mce
IR RC6 protocol handler initialized
rc rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input11
rc rc0: lirc_dev: driver ene_ir registered at minor = 0, raw IR receiver, no transmitter
rc rc0: nonsensical timing event of duration 0
rc rc0: two consecutive events of type space
ene_ir: driver has been successfully loaded
toshiba_acpi: Toshiba Laptop ACPI Extras version 0.24
input: Toshiba input device as /devices/virtual/input/input12
toshiba_acpi: Registering Toshiba accelerometer iio device
toshiba_acpi: Supported laptop features: hotkeys illumination touchpad eco-led accelerometer-axes usb-sleep-charge cooling-method
usb 8-2: new full-speed USB device number 2 using uhci_hcd
usb 8-2: config 1 interface 1 altsetting 0 endpoint 0x83 has wMaxPacketSize 0, skipping
usb 8-2: config 1 interface 1 altsetting 0 endpoint 0x3 has wMaxPacketSize 0, skipping
usb 8-2: New USB device found, idVendor=0930, idProduct=020f, bcdDevice= 3.08
usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 8-2: Product: Askey for Toshiba
usb 8-2: Manufacturer: Broadcom Corp
usb 8-2: SerialNumber: 0024D2DA5AF8
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20190703/utaddress-213)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
snd_hda_intel 0000:00:1b.0: Applying patch firmware 'hda-jack-retask.fw'
snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:01:00.1: Applying patch firmware 'hda-jack-retask.fw'
cfg80211: Loading compiled-in X.509 certificates for regulatory database
cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: dig-out=0x1e/0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
intel_powerclamp: No package C-state available
intel_powerclamp: No package C-state available
ath: phy0: Enable LNA combining
ath: phy0: ASPM enabled: 0x42
ath: EEPROM regdomain: 0x6a
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x6a
ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffb6bfc0540000, irq=19
mc: Linux media interface: v0.10
wl: loading out-of-tree module taints kernel.
wl: module license 'MIXED/Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
wl: module verification failed: signature and/or required key missing - tainting kernel
videodev: Linux video capture interface: v2.00
ath9k 0000:14:00.0 wlp20s0: renamed from wlan0
uvcvideo: Found UVC 1.00 device USB 2.0 HD Camera (064e:c117)
uvcvideo: Failed to query (GET_INFO) UVC control 9 on unit 1: -32 (exp. 1).
uvcvideo 1-6:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-6:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-6:1.0: Entity type for entity Camera 1 was not initialized!
input: USB 2.0 HD Camera : USB 2.0 HD as /devices/pci0000:00/0000:00:1a.7/usb1/1-6/1-6:1.0/input/input16
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
audit: type=1400 audit(1617769195.444:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=716 comm="apparmor_parser"
audit: type=1400 audit(1617769195.444:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=716 comm="apparmor_parser"
audit: type=1400 audit(1617769195.520:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=717 comm="apparmor_parser"
audit: type=1400 audit(1617769195.520:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=717 comm="apparmor_parser"
audit: type=1400 audit(1617769195.520:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=717 comm="apparmor_parser"
audit: type=1400 audit(1617769195.520:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=717 comm="apparmor_parser"
audit: type=1400 audit(1617769195.816:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=720 comm="apparmor_parser"
audit: type=1400 audit(1617769195.888:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=721 comm="apparmor_parser"
audit: type=1400 audit(1617769195.888:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=721 comm="apparmor_parser"
audit: type=1400 audit(1617769195.888:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=721 comm="apparmor_parser"
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d ' to make it known.
atkbd serio0: Unknown key pressed (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d ' to make it known.
atkbd serio0: Unknown key released (translated set 2, code 0x8d on isa0060/serio0).
atkbd serio0: Use 'setkeycodes e00d ' to make it known.
kauditd_printk_skb: 19 callbacks suppressed
audit: type=1400 audit(1617769228.207:31): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/etc/ssl/openssl.cnf" pid=1032 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=123 ouid=0
wlp20s0: authenticate with e8:94:f6:41:fc:3e
wlp20s0: send auth to e8:94:f6:41:fc:3e (try 1/3)
wlp20s0: authenticated
wlp20s0: associate with e8:94:f6:41:fc:3e (try 1/3)
wlp20s0: RX AssocResp from e8:94:f6:41:fc:3e (capab=0x431 status=0 aid=4)
wlp20s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp20s0: link becomes ready
audit: type=1400 audit(1617769239.671:32): apparmor="DENIED" operation="open" profile="/usr/bin/freshclam" name="/etc/ssl/openssl.cnf" pid=1032 comm="freshclam" requested_mask="r" denied_mask="r" fsuid=123 ouid=0
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
perf: interrupt took too long (2514 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
perf: interrupt took too long (3149 > 3142), lowering kernel.perf_event_max_sample_rate to 63500
perf: interrupt took too long (3944 > 3936), lowering kernel.perf_event_max_sample_rate to 50500
perf: interrupt took too long (4931 > 4930), lowering kernel.perf_event_max_sample_rate to 40500
perf: interrupt took too long (6168 > 6163), lowering kernel.perf_event_max_sample_rate to 32250
loop0: p1 p2 p3 p4
loop1: p1 p2 p3 p4
loop2: p1 p2
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
audit: type=1400 audit(1617773197.854:33): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=832 comm="cupsd" capability=12 capname="net_admin"
audit: type=1400 audit(1617773223.175:34): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=832 comm="cupsd" capability=12 capname="net_admin"